15Ft 28AWG Cat6 UTP Slim Ethernet Network Patch Cable Booted Black

15Ft 28AWG Cat6 UTP Slim Ethernet Network Patch Cable Booted Black. Our Cat6 Slim Ethernet Network Cable Booted 28AWG 4 pair UTP Ethernet wire and is designed to optimize the...
$3.02
Availability: 2000 In Stock
Code: C6-287BK-01
0.16 lb

15Ft 28AWG Cat6 UTP Slim Ethernet Network Patch Cable Booted Black.

Our Cat6 Slim Ethernet Network Cable Booted 28AWG 4 pair UTP Ethernet wire and is designed to optimize the space in telecommunication room and data center. Cable diameter is mere 3.6mm (0.14") compared to standard 5.8mm (0.23") and provides 48% reduction in diameter and 73% reduction in space. Small size means cables are easier to manage, higher-density patching is more feasible, and valuable rack space can be used for equipments and ventilation, rather than cable management. It is also suitable for residential installation to keep cabling around the cable/DSL modem and router low profile. Our slim patch cable comes with neat looking clear strain releaf boots. Available length is 1Ft to 25Ft.

SPEC DRAWING (PDF)



All our CAT6 stranded patch cables are 550 MHz and will support 1000 Mbps or Gigabyte networks. CAT6 Ethernet Patch Cables are 2.5 times faster than Category 5e or Enhanced Cables. Our CAT6 Cables are meet TIA/EIA T-568B and have 50 micron gold plated connectors. Our Ethernet Cable is right network Cable to replace any CAT5 or CAT5e Cable that fails to support 100 Base-T or Gigabit Ethernet and perfect in conjunction with 100 Base-T and Gigabit Ethernet networks which are factory tested and your trusted Ethernet cables for video streaming, distributing data or voice.

CAT6 Standard Wiring

* Cat.6 rated UTP (Unshielded Twist Pair) patch cable
* CM Jacket
* 28AWG 4pair stranded pure copper wire
* Clear strain releaf boot
* 50 micron gold plated short body RJ45 plug
* RoHS compliant

FAQ
TIA/EIA


TIA/EIA is abbreviation of Telecommunication Industry Association and Electronics Industry Alliance that sets telecommunication standards in the US. Our patch cable complies with the latest TIA/EIA telecommunication cable standards.
T-568B Wiring

There are two standards for wiring color code, 568A and 568B. While there's no difference in connectivity between 568A and 568B, 568B is the most prevalent wi ring color code in the US. Our patch cable is 568B wired.
UTP and STP



UTP is Unshielded Twisted Pair and STP is Shielded Twisted Pair. STP cable is wrapped in metal foil or braid. Both have the same Ethernet communication performance, but STP has better protection against Electro-Magnetis noise from outside. UTP is accepted for residential and general commercial installation.
CM rated jacket


CM for communication. It is set by UL
(Underwriters labolatory) to indicate the wire jacket material safety. CM rating is safe to use in residential and
general commercial installtions.
24AWG and Stranded



AWG (American Wire Gauge) indicates wire thickness. Higher the number, thinner the wire. 24AWG or 26AWG is commonly used for ethernet cables. Stranded wire is a bundle of thin wires as oposed to solid wire that is single solid wire. Stranded wire is more flexible than solid wire and commonly used for indoor network wiring such as patch cable.
RoHS


Restriction of Hazardous Substances Directive. This directive restricts the use of hazardous materials such as lead or mercury in the manufacture of electronic and electrical equipments. Our cables are all RoHS compliant.
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page

#title#

#price#
×