You have no items in your shopping cart.
0item(s)
You have no items in your shopping cart.
A slow link is not always a switch problem, and a flaky camera run is not always a bad port. In many networks, the weak point is much simpler: the ethernet patch cables used between patch panels, switches, endpoints, and powered devices. Choosing the right one is less about chasing...
Read more >A patch cable that looks fine on the shelf can still be the wrong choice for the job. If you are figuring out how to choose ethernet patch cable for a rack, office drop, PoE device, or home network, the right answer usually comes down to four things: category, shielding,...
Read more >If you are pricing a backbone run for one building, upgrading a campus link, or replacing fiber in an existing rack, the singlemode vs multimode fiber decision affects more than cable cost. It changes your optics budget, your distance limits, your upgrade path, and sometimes the connectors and hardware you...
Read more >A clean cable run looks simple when it is finished. What usually causes trouble is everything hidden behind the wall, above the ceiling, or inside the rack - too much pull tension, poor bend radius, bad separation from power, or terminations that untwist the pairs too far. If you are...
Read more >If you are comparing cables for 4K 120Hz, 8K, eARC, or gaming hardware, a guide to HDMI 2.1 bandwidth matters because the label alone does not tell you what a cable or device can actually carry. The real question is bandwidth - how much data the source, display, and cable...
Read more >