You have no items in your shopping cart.
NOTE: The item need connect with the Access Point Router together, then it can work, and the Access Point Router is NOT included.
Product Description
* Low-noise receive...
NOTE: The item need connect with the Access Point Router together, then it can work, and the Access Point Router is NOT included.
Product Description
* Low-noise receive gain.
* Signal activity LED indicates.
* High Gain, High Value, High Performance.
* Maximum output power of 8000mW by the Booster.
* Plug-and-play, Easy installation, no driver needed.
* Ideal for increase the 2400-2500 MHz frequency devices.
* Increase the effective range and coverage area of your Wi-Fi network.
* Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow.
* The amplified wireless signal may even penetrate complex environments with many walls and obstacles.
* Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only).
Features
* Recommend the input power of RFIN port to between 7dBm and 15dBm.
* Make sure all power supply to the booster and the AP/Router unit be disconnected before removing or changing antenna.
* When finishing connecting the booster and the AP/Router, restore power supply first to the booster and then to AP/Router subsequently.
* Waterproof, lightning protection equipment should be attached to outdoor antenna.
* Keep away from heat and keep ventilated.
* Please comply with local regulations of electromagnetic radiation.
Specifications
Operation Range: 2400-2500 MHz
Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
Frequency Response: ± 1dB over operation range
Input Power: 3dBm (Min.)-20dBm (Max.)
Input Power: 5 ~ 20 dBm
Optimal Input Power: 9 ~ 15 dBm
Output Power: 8000mW/39dBm nominal for 802.11b/11Mbps
Connector: SMA Receptacle, 50ohm
Transmit Gain: 17dBm nominal
Receiver Gain: 11dBm.
Receive Noise Figure: 3.0dBm nominal
Operating Temperature: -40 to 70 degree
Operating Humidity: Up to 95% relative humidity
Material: Cast Aluminum
PROPOSITION 65 WARNING FOR CALIFORNIA RESIDENTS
These products may contain chemicals (including but not limited to Styrene, BPA, DINP, etc) known only to the State of California to cause cancer, birth defects, or other reproductive harm. For more information about pro 65, please CLICK HERE.